| Weight |
2,42 kg |
| Motor size |
68 |
| Size |
200 mm |
| Rotor surface |
Painted black |
| Terminal box material |
PA plastic |
| Impeller material |
PA plastic |
| Housing material |
PP plastic |
| Number of blades |
7 |
| Direction of rotation |
Clockwise, viewed toward rotor |
| Degree of protection |
IP44 / installation- and position-dependent as per EN 60034-5 |
| Insulation class |
"B" |
| Moisture (F) / Environmental (H) protection class |
H1 |
| Max. permitted ambient temp. for motor (transport/storage) |
+ 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) |
- 40 °C |
| Installation position |
Shaft horizontal or rotor on top; rotor on bottom on request |
| Condensation drainage holes |
None |
| Mode |
S1 |
| Motor bearing |
Ball bearing |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
< 0,75 mA |
| Electrical hookup |
Plug |
| Motor protection |
Thermal switch auto reset, internally connected |
| with cable |
Variable |
| Protection class assignment |
I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Motor capacitor according to EN 60252-1 in safety protection class |
S0 |
| Conformity with standards |
EN 60335-1 / CE |
| Comment on CE |
Ecodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W. |
| Approval |
EAC / CSA C22.2 No. 77 / UL 1004-3 |
